← Hinge Index

About Us

Hinge Index is a reference for people choosing a French-door refrigerator beside a right-hand wall. We maintain a comparison of 20 U.S. models from LG and Samsung.

What a fit result covers

Measure from the metal case to the finished wall and tell the checker where the wall ends. The result tells you whether the right door can open to 90° with its original handle and the required side clearance. The width and height of the opening, the other sides of the appliance and access to the drawers need their own checks.

How we read a drawing

We match the U.S. model number and handle style to the manufacturer’s installation drawings and specifications. We check which points each dimension connects. An arrow from the case to a cabinet side describes a different measurement from an arrow that reaches the handle of an open door.

For example, the LG LF25Z6211S drawing gives 5/32 inch at the door edge with the pocket handle. At a ¼-inch right-side gap beside a full wall, the model clears. If a drawing gives only the combined width of two open doors, we leave the individual right-side clearance unresolved unless another source documents it. LG Pro Builder drawing, printed page 2 (PDF).

What changes with the same ¼-inch gap?

For the 20 U.S. models reviewed on , we held the right-side gap at ¼ inch (6.35 mm) and changed only where the wall ended. Each result covers the right door at 90° with its original handle. A failed result can also mean the installation allowance is too small.

On the same full wall, the LG LF24Z6530S with a bar handle needs 2⅛ inches. The two-model comparison shows both drawings. Drawer removal is a separate check in the showroom guide.

Check a model or flag a correction

Every entry in the model comparison links to a drawing. Open Model notes for the handle details, any conflicting figures and the original source links. The results come from document review. To flag a newer drawing, a changed model suffix or an unclear verdict, use the contact page.