Measure from the left cabinet to the right wall. Compare the room left for the right door to open 90° on 20 LG and Samsung models.
Use this layout when the left cabinet ends behind the hinge and leaves the left door free. For a fridge already in place, check the measured right gap.
Results by model
1 clear 90° · 17 ruled out · 2 need verification
These U.S. models are 35¾″ to 35⅞″ wide. Smaller 30″ and 33″ models fall outside this comparison.
No models have this result for these measurements.
LGLF25Z6211S
Clears 90°35¾″ wide · 5/32″ left · 11/32″ rightMeets the 5/32″ allowance with 3/16″ to spare.
Dimensions & drawings
Use the supplied side spacers when fitting a narrow opening.
The model-specific Pro Builder sheet lists 5/32″ at the door edge with its pocket handle. Use the supplied side spacers in a narrow opening.
LGLF24Z6530S
Ruled out35¾″ wide · 5/32″ left · 11/32″ rightDoor or handle hits the wall. Its swing needs at least 2⅛″.
Dimensions & drawings
Use the supplied side spacers when fitting a narrow opening.
LG lists 5/32″ beside the cabinet and 2⅛″ beside the open door with its bar handle. Use the supplied side spacers in a narrow opening.
SamsungRF70H25GERAA
Ruled out35⅞″ wide · 4 mm left · ≈0.218″ rightDoor or handle hits the wall. Its swing needs at least 44 mm (about 1¾″).
Dimensions & drawings
Documented minimum opening: 36¼″.
Samsung pairs 35⅞″ with 912 mm for the case and 36¼″ with 920 mm for the minimum opening. The left and right installation gaps are at least 4 mm. The remainder shown uses the printed U.S. inch widths. If the paired values give different verdicts, confirm the dimensions before ordering.
Samsung draws ¼″ from the case to a short cabinet side. A long wall reaches the bar handle, which projects about 1¾″ (44 mm) at 90°. V7 allows 3¾″ beside a wall. V10 leaves the intermediate range unconfirmed.
SamsungRF70H25HERAA
Ruled out35⅞″ wide · 4 mm left · ≈0.218″ rightDoor or handle hits the wall. Its swing needs at least 44 mm (about 1¾″).
Dimensions & drawings
Documented minimum opening: 36¼″.
Samsung pairs 35⅞″ with 912 mm for the case and 36¼″ with 920 mm for the minimum opening. The left and right installation gaps are at least 4 mm. The remainder shown uses the printed U.S. inch widths. If the paired values give different verdicts, confirm the dimensions before ordering.
Samsung draws ¼″ from the case to a short cabinet side. A long wall reaches the bar handle, which projects about 1¾″ (44 mm) at 90°. V7 allows 3¾″ beside a wall. V10 leaves the intermediate range unconfirmed.
LGLF24Z6330S
Needs verification35¾″ wide · 5/32″ left · 11/32″ rightThe right-side swing dimension with the original handle is missing. Overall open-door width cannot confirm this gap.
Dimensions & drawings
Use the supplied side spacers when fitting a narrow opening.
The shared installation drawing shows 5/32″ for a short side wall. The sheet gives overall open-door width but omits a right-side dimension with the bar handle.
LGLY24Z6231V
Needs verification35¾″ wide · 5/32″ left · 11/32″ rightThe right-side swing dimension with the original handle is missing. Overall open-door width cannot confirm this gap.
Dimensions & drawings
Use the supplied side spacers when fitting a narrow opening.
The shared installation drawing shows 5/32″ for a short side wall. The model sheet has conflicting open-door dimensions and no confirmed right-side measurement for a long wall.
LGLRFLC2706S
Ruled out35¾″ wide · ⅛″ left · ⅜″ rightDoor or handle hits the wall. Its swing needs at least 4½″.
Dimensions & drawings
LG lists 4½″ at the open door edge with its handle. The sheet gives no smaller verified 90° gap for a wall ending at the hinge.
LGLRFXC2606S
Ruled out35¾″ wide · ⅛″ left · ⅜″ rightDoor or handle hits the wall. Its swing needs at least 4¼″.
Dimensions & drawings
LG lists 4¼″ at the open door edge with its handle. The sheet gives no smaller verified 90° gap for a wall ending at the hinge.
LGLF29H8330S
Ruled out35¾″ wide · ⅛″ left · ⅜″ rightDoor or handle hits the wall. Its swing needs at least 4¼″.
Dimensions & drawings
LG lists 4¼″ with its original bar handle. The 2¼″ handle-off dimension applies only with the handle removed.
LGLF25G8330S
Ruled out35¾″ wide · ⅛″ left · ⅜″ rightDoor or handle hits the wall. Its swing needs at least 4¼″.
Dimensions & drawings
LG lists 4¼″ with its original bar handle. The 2¼″ handle-off dimension applies only with the handle removed.
LGLRFLS3206S
Ruled out35¾″ wide · ⅛″ left · ⅜″ rightDoor or handle hits the wall. Its swing needs at least 4¼″.
Dimensions & drawings
LG lists 4¼″ at the open door edge with its handle. The sheet gives no smaller verified 90° gap for a wall ending at the hinge.
LGLF30S8210S
Ruled out35¾″ wide · ⅛″ left · ⅜″ rightDoor or handle hits the wall. Its swing needs at least 2⅜″.
Dimensions & drawings
LG Customer Care specifies 2⅜″ for either door to reach 90°. The product sheet gives only the combined two-door width.
SamsungRF70H30GERAA
Ruled out35⅞″ wide · 4 mm left · ≈0.218″ rightDoor or handle hits the wall. Its swing needs at least 44 mm (about 1¾″).
Dimensions & drawings
Documented minimum opening: 36¼″.
Samsung pairs 35⅞″ with 912 mm for the case and 36¼″ with 920 mm for the minimum opening. The left and right installation gaps are at least 4 mm. The remainder shown uses the printed U.S. inch widths. If the paired values give different verdicts, confirm the dimensions before ordering.
Samsung draws ¼″ from the case to a short cabinet side. A long wall reaches the bar handle, which projects about 1¾″ (44 mm) at 90°. V7 allows 3¾″ beside a wall. V10 leaves the intermediate range unconfirmed.
SamsungRF70H30HERAA
Ruled out35⅞″ wide · 4 mm left · ≈0.218″ rightDoor or handle hits the wall. Its swing needs at least 44 mm (about 1¾″).
Dimensions & drawings
Documented minimum opening: 36¼″.
Samsung pairs 35⅞″ with 912 mm for the case and 36¼″ with 920 mm for the minimum opening. The left and right installation gaps are at least 4 mm. The remainder shown uses the printed U.S. inch widths. If the paired values give different verdicts, confirm the dimensions before ordering.
Samsung draws ¼″ from the case to a short cabinet side. A long wall reaches the bar handle, which projects about 1¾″ (44 mm) at 90°. V7 specifies 3¾″ for 90°. Between the handle outline and that allowance, check the installation.
SamsungRF70F23DERAA
Ruled out35¾″ wide · ⅜″ left · ⅛″ rightDoor or handle hits the wall. Its swing needs at least 2⅛″.
Dimensions & drawings
The 90° plan shows a 2⅛″ door projection. Samsung calls for 3¾″ along a wall. A tighter short-wall fit needs hinge-setback data.
SamsungRF23DB960012AA
Ruled out35⅞″ wide · ⅜″ left · 0″ rightDoor or handle hits the wall. Its swing needs at least 2¼″.
Dimensions & drawings
The drawing shows a 2¼″ door projection. The spec sheet calls for 2½″ alongside a wall; the fit guide allows 3¾″ for 90°. A tighter short-wall fit needs hinge-setback data.
SamsungRF24BB6200QLAA
Ruled out35¾″ wide · ⅜″ left · ⅛″ rightDoor or handle hits the wall. Its swing needs at least 2⅛″.
Dimensions & drawings
The 90° door outline extends 2⅛″. The fit guide gives this model 3¾″ along a wall on its second page. A tighter short-wall fit needs hinge-setback data.
SamsungRF27CG5100SRAA
Ruled out35¾″ wide · ⅜″ left · ⅛″ rightDoor or handle hits the wall. Its swing needs at least 1⅞″.
Dimensions & drawings
The door alone projects 1⅞″. The fit guide says 3¾″, while the drawing shows 4¼″ to the handle. The larger dimension clears both. A tighter short-wall fit needs hinge-setback data.
SamsungRF29BB8600QLAA
Ruled out35¾″ wide · ⅜″ left · ⅛″ rightDoor or handle hits the wall. Its swing needs at least 2⅛″.
Dimensions & drawings
The fit guide allows 3¾″. The spec drawing also marks 2⅛″ and 4¾″ at the open right door. The larger figure is the conservative fit. A tighter short-wall fit needs hinge-setback data.
SamsungRF31CG7400SRAA
Ruled out35¾″ wide · ⅜″ left · ⅛″ rightDoor or handle hits the wall. Its swing needs at least 1⅞″.
Dimensions & drawings
The door projects 1⅞″. An older fit guide says 3¾″ along a wall. The model-specific drawing gives 4¼″ for the handle at 90°. A tighter short-wall fit needs hinge-setback data.
How much room is left for the door?
Subtract the closed refrigerator width and the space you leave on its left from the narrowest finished opening. The remainder is the right-side gap. If you center the fridge, its left gap is half the difference between the opening and the fridge width. Enter that gap to check that placement.
For example, the LG LF25Z6211S is 35¾″ wide. In a 36¼″ opening with ¼″ on the left, it has ¼″ on the right. The pocket handle needs 5/32″ by a full wall, leaving 3/32″ above the published clearance. The bar-handle LF24Z6530S has the same width but needs 2⅛″ on the right. See the pocket-handle drawing or check the bar-handle model.
Results cover width and the right door with its original handle. Check height, rear and top space, connections, and drawer removal separately. If your tape reading lands exactly on a published limit, remeasure the top, middle and bottom of the opening before ordering. Take the measurement sheet to the showroom.